Bang-olufsen BeoLab 7-6 - User Guide Bedienungsanleitung PDF herunterladen (Seite 3)

Daily use

When you have nished setting

up the loud speaker as described

on the following pages, connect

the entire system to the mains.

Loudspeaker protection

The loud speaker is equipped with a

thermal protection system which

prevents damage from overheating.

If an error occurs – or the speaker

units become overheated – the

system automatically switches the

loud speaker to standby.

To restore the sound:

> Disconnect the loudspeaker from

the mains supply.

> Allow the system time to reset or

cool down (approximately 3–5

minutes).

> Reconnect the loudspeaker to

the mains supply.

Should the problem persist, contact

your Bang & Olufsen retailer.

To clean the loudspeaker

Clean dusty surfaces using a dry,

soft cloth. If necessary, remove

grease stains or persistent dirt with

a lint-free, rmly wrung cloth,

dipped in a solution of water

containing only a few drops of mild

detergent, such as washing-up

liquid.

The loud speaker front grill may be

cleaned with a vacuum cleaner with

a soft brush nozzle, and set to the

lowest level.

Never use alcohol or other solvents

to clean any parts of the loud-

speaker!

To switch on and off

When you switch on your Bang &

Olufsen system, the loud speaker

switches on simul taneously, and

when you switch the system off

again the loud speaker also switches

to standby.

Caution: Handle the loudspeaker

front grill with great care. Dents

and scratches are not covered by

the guarantee!

3

1 2 3 4 5 6 7 8 ... 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare